2N® 2Wire (set of 2 adaptors and power source for EU)

Description

2N^® 2Wire is a set of two convertor units that lets you connect any IP device installed at locations with no IP infrastructure to your network. Connect the device, such as an IP intercom, to one unit and a switch to the other unit. Then connect both convertor units to each other using the existing analogue wiring. This will transmit audio and video as well as supply power.

Ethernet including PoE over 2 wires
Long reach
Up to four sets per installation

Spécifications

Plus d'infos
SKU	9159014eu
Warranty	3 Years
Caractéristiques	Ethernet Interface Connector type: RJ45 Speed: 10/100 Base T, half-duplex / full-duplex, auto-negotiation, IEEE 802.3af/at 40W, PoE+ compatible Installation requirements Cable type: 2-wire, Cat 5e, Cat 6 or similar Impedance: 25Ω to 100Ω Transfer range: max. 220m with Cat 6 Number: max. of 4 sets of convertor units per non-configurable switch Transfer method Access method: CSMA/CA and TDMA Modulation method: Windowed OFDM Frequency band: 1.8MHz to 30MHz LED indicator lights Power supply: Blue – power on BNC: Green – connection on PoE: Green – connection on Electrical power supply AC input: 100~240V AC, 50~60Hz DC output: 48V DC / 0.84A~1.3A Mechanical properties Dimensions: 40 x 40 x 75mm (h x w x d) Weight: 120g Material: extruded aluminium Operating temperature: -10°C – 50°C Storage temperature: -30°C – 70°C

Téléchargements

Categories:

Intercoms Accessories 2N